Free Shipping Included! ART Phantom I 48V Phantom Microphone Power Supply by ART at Tara Brooks Music. MPN: PHANTOM1. Hurry! Limited time offer. Offer valid only while supplies last. Different condenser microphones specify different amounts of required phantom power. As a rule, these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be more is better.Input Connector: XLR female. Output Connector: XLR Male. Frequency Response: 10 Hz to 25 kHz. Output Noise: -115 dB. Current Drain: 14 mA.
Product Description & Reviews
Different condenser microphones specify different amounts of required phantom power. As a rule, these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be more is better.
Features & Highlights
- Input Connector: XLR female
- Output Connector: XLR Male
- Frequency Response: 10 Hz to 25 kHz
- Output Noise: -115 dB
- Current Drain: 14 mA
Phantom Power Supplies
3 x 7 x 14 inches
6.9 x 2.2 x 13.4 inches
Have questions about this item (PHANTOM1), or would like to inquire about a custom or bulk order?
If you have any questions about this product by ART, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: APS2, ean: 0687471251072,
The Audix APS2 two channel 48V Phantom power supply offers 48V of direct current for any two condenser microphones. If your mixer or audio interface doesn't provide sufficient power to drive your mics, add this Solid accessory to your mic collection....
mpn: AT8539, ean: 0042005152612,
Power module for AT892 microset. Also suitable for use with any Audio-Technica wireless essentials microphone terminated with 4-pin locking connector. The AT8539 allows you to convert your wireless microphone into a wired model. Comes equipped with a...
mpn: K6, ean: 0615104185715,
The K6 powering module is the heart of this Sennheiser professional modular microphone system and can be powered either by its internal 'AA' size 1.5 V battery or by 12 - 48 V phantom power. The K6 can be combined with different condenser microphone ...
mpn: R800 0148, ean: 0676101041145,
The SB-48 utilizes a non-radiating charge pump circuit to create a stable, ripple-free 48 volt supply for active direct boxes and condenser microphones. It is powered by a single 15VDC 400 mA supply (included), with XLR inputs and outputs for each ch...